下文給大家?guī)鞨aproxy+keepalived如何實現sphinx高可用負載均衡詳解，希望能夠給大家在實際運用中帶來一定的幫助，負載均衡涉及的東西比較多，理論也不多，網上有很多書籍，今天我們就用創新互聯在行業內累計的經驗來做一個解答。

網站建設哪家好，找成都創新互聯！專注于網頁設計、網站建設、微信開發、微信小程序開發、集團企業網站建設等服務項目。為回饋新老客戶創新互聯還提供了泉港免費建站歡迎大家使用！

Haproxy+keepalived實現sphinx高可用負載均衡  

環境如下：
【node3】
haproxy：192.168.1.189
【node4】
haproxy：192.168.1.103
vip：192.168.1.222/192.168.1.223

# apt-get install ipvsadm 
# apt-get install linux-headers-$(uname -r)
# ln -s /usr/src/linux-headers-2.6.32-33 /usr/src/linux
# wget http://www.keepalived.org/software/keepalived-1.2.2.tar.gz
# tar zxvf keepalived-1.2.2.tar.gz -C ../software/
# ./configure --prefix=/usr/local/keepalived-1.2.2
configure: error:!!! OpenSSL is not properly installed on your system. !!!!!! Can not include OpenSSL headers files.解決辦法：
# apt-get install libssl-dev
configure: error: Popt libraries is required
解決辦法：
# apt-get install libpopt-dev
configure: WARNING: keepalived will be built without libnl support.
解決辦法：
# apt-get install libnl-dev
/usr/include/stdint.h:41: error: conflicting types for ‘int64_t’
/usr/src/linux/include/linux/types.h:125: error: previous declaration of ‘int64_t’ was here
/usr/include/stdint.h:56: error: conflicting types for ‘uint64_t’
解決辦法：
# vim ./keepalived/libipvs-2.6/ip_vs.h
將#include <linux/types.h>移動到#include <sys/types.h>后面去。

# ./configure --prefix=/usr/local/keepalived-1.2.2
Keepalived configuration
------------------------
Keepalived version       : 1.2.2
Compiler                 : gcc
Compiler flags           : -g -O2
Extra Lib                : -lpopt -lssl -lcrypto  -lnl
Use IPVS Framework       : Yes
IPVS sync daemon support : Yes
IPVS use libnl           : Yes
Use VRRP Framework       : Yes
Use Debug flags          : No
# make
# make install

# vim /etc/sysctl.conf
net.ipv4.ip_nonlocal_bind=1
# sysctl -p
【node3】
global_defs {
        router_id LVS_DEVEL
}

vrrp_script chk_haproxy {
       script "/usr/local/scripts/chk_haproxy.sh"
        interval 2
        weight 2
}

vrrp_instance VI_1 {
        state MASTER
        interface eth0
        virtual_router_id 76
        priority 150
        advert_int 1
        authentication {
                auth_type PASS
                auth_pass 123456
                }
       track_script {
               chk_haproxy
               }
        virtual_ipaddress {
                192.168.1.222
                }
}

vrrp_instance VI_2 {
        state BACKUP
        interface eth0
        virtual_router_id 77
        priority 100
        advert_int 1
        authentication {
                auth_type PASS
                auth_pass 123456
                }
       track_script {
               chk_haproxy
               }
        virtual_ipaddress {
                192.168.1.223
                }
}

【node4】
global_defs {
        router_id LVS_DEVEL
}

vrrp_script chk_haproxy {
       script "/usr/local/scripts/chk_haproxy.sh"
        interval 2
        weight 2
}

vrrp_instance VI_1 {
        state BACKUP
        interface eth0
        virtual_router_id 76
        priority 100
        advert_int 1
        authentication {
                auth_type PASS
                auth_pass 123456
                }
       track_script {
               chk_haproxy
               }
        virtual_ipaddress {
                192.168.1.222
                }
}

vrrp_instance VI_2 {
        state MASTER
        interface eth0
        virtual_router_id 77
        priority 150
        advert_int 1
        authentication {
                auth_type PASS
                auth_pass 123456
                }
       track_script {
               chk_haproxy
               }
        virtual_ipaddress {
                192.168.1.223
                }
}

# vim chk_haproxy.sh
#!/bin/bash

STATUS=`netstat -nptl | grep haproxy | grep 3312 | wc -l`

if [ "$STATUS" -eq "0" ]; then
   /usr/local/haproxy-1.4.18/sbin/haproxy -f /usr/local/haproxy-1.4.18/haproxy.conf
   STATUS2=`netstat -nptl | grep haproxy | grep 3312 | wc -l`
   if [ "$STATUS2" -eq "0"  ]; then
      kill -9 $(ps -ef | grep keepalived | grep -v grep | awk '{print $2}')
  fi
fi

看了以上關于Haproxy+keepalived如何實現sphinx高可用負載均衡詳解，如果大家還有什么地方需要了解的可以在創新互聯行業資訊里查找自己感興趣的或者找我們的專業技術工程師解答的，創新互聯技術工程師在行業內擁有十幾年的經驗了。

 

本文題目：Haproxy+keepalived如何實現sphinx高可用負載均衡詳解
當前地址：http://aaarwkj.com/article14/isggge.html

成都網站建設公司_創新互聯，為您提供Google、微信小程序、動態網站、全網營銷推廣、App設計、標簽優化

廣告

聲明：本網站發布的內容（圖片、視頻和文字）以用戶投稿、用戶轉載內容為主，如果涉及侵權請盡快告知，我們將會在第一時間刪除。文章觀點不代表本網站立場，如需處理請聯系客服。電話：028-86922220；郵箱：631063699@qq.com。內容未經允許不得轉載，或轉載時需注明來源： 創新互聯