Checkpoint防火墻ClusterXL 故障之FIB Problem問題解決

成都創新互聯公司網絡公司擁有十余年的成都網站開發建設經驗，千余家客戶的共同信賴。提供網站設計制作、成都網站建設、網站開發、網站定制、友情鏈接、建網站、網站搭建、響應式網站建設、網頁設計師打造企業風格，提供周到的售前咨詢和貼心的售后服務

 

辦公網有兩臺CheckPoint防火墻做cluster的HA主備模式，Custer-HA出現故障現象如下（其中一臺CP-248狀態為down，一邊CP-246為active），導致CP-246和CP-248的cluster的HA準備切換不成功。

[NJZQ-CP-248]# cphaprob stat  

 

Cluster Mode:   New High Availability (Active Up)

 

 

Number    Unique Address  Assigned Load   State      

 

1       19.19.19.246    100%            Active     

2 (local) 19.19.19.248    0%              Down   

 

[NJZQ-CP-248]# cphaprob list  //該命令非常有用，用于查找出CP防火墻cluster的監控的關鍵組件（cp稱為Device）

 

Built-in Devices:

 

Device Name: Interface Active Check

Current state: OK

 

Registered Devices:

 

Device Name: Synchronization

Registration number: 0

Timeout: none

Current state: OK

Time since last report: 705.3 sec

 

Device Name: Filter

Registration number: 1

Timeout: none

Current state: OK

Time since last report: 699.2 sec

 

Device Name: cphad

Registration number: 2

Timeout: 2 sec

Current state: OK

Time since last report: 0.6 sec

 

Device Name: fwd

Registration number: 3

Timeout: 2 sec

Current state: OK

Time since last report: 0.4 sec

 

Device Name: FIB

Registration number: 4

Timeout: none

Current state: problem

Time since last report: 1 sec

 

對應的CP-246的顯示如下：

 

[NJZQ-CP-246]# cphaprob stat

 

Cluster Mode:   New High Availability (Active Up)

 

 

Number    Unique Address  Assigned Load   State      

 

1 (local) 19.19.19.246    100%            Active     

2     19.19.19.248    0%              Down 

 

并且發現對應的CP-246的cphaprob list顯示并無異常，均為OK。

 

[Expert@NJZQ-CP-246]# cphaprob list

 

Built-in Devices:

 

Device Name: Interface Active Check

Current state: OK

 

Registered Devices:

 

Device Name: Synchronization

Registration number: 0

Timeout: none

Current state: OK

Time since last report: 3077.4 sec

 

Device Name: Filter

Registration number: 1

Timeout: none

Current state: OK

Time since last report: 3071.4 sec

 

Device Name: cphad

Registration number: 2

Timeout: 2 sec

Current state: OK

Time since last report: 0.2 sec

 

Device Name: fwd

Registration number: 3

Timeout: 2 sec

Current state: OK

Time since last report: 0.8 sec

發現以上的故障現象后，對CP-248的clusterXL進行重啟如下：

[NJZQ-CP-248]# expert

Enter expert password:

 

You are in expert mode now.

 

[Expert@NJZQ-CP-248]# clusterXL_admin down

Setting member to administratively downstate ...

Member current state is Down

[Expert@NJZQ-CP-248]# clusterXL_admin up 

Setting member to normal operation ...

Member current state is Down

Operation failed: member is still down,run 'cphaproblist' for further details

 

重啟后，仍然不成功。

 

從網上找到解決方法：比較兩臺fw的cpconfig配置條目發現：

[NJZQ-CP-246]# expert

Enter expert password:

 

You are in expert mode now.

 

[Expert@NJZQ-CP-246]# cpconfig

This program will let you re-configure

your Check Point products configuration.

 

 

Configuration Options:

----------------------

(1) Licenses and contracts

(2) SNMP Extension

(3) PKCS#11 Token

(4) Random Pool

(5) Secure Internal Communication

(6) Disable cluster membership for this gateway

(7) Configure Check Point CoreXL

(8) Automatic start of Check Point Products

 

(9) Exit

 

Enter your choice (1-9) :

 

[NJZQ-CP-248]# expert

Enter expert password:

 

You are in expert mode now.

 

[Expert@NJZQ-CP-248]# cpconfig

This program will let you re-configure

your Check Point products configuration.

 

 

Configuration Options:

----------------------

(1) Licenses and contracts

(2) SNMP Extension

(3) PKCS#11 Token

(4) Random Pool

(5) Secure Internal Communication

(6)  Disable Advanced Routing  //注意到該部分為此防火墻和CP-246防火墻不一致的地方，且當前已經處于開啟狀態。

(7) Disable cluster membership for this gateway

(8) Configure Check Point CoreXL

(9) Automatic start of Check Point Products

 

(10) Exit

 

Enter your choice (1-10) :6 //這里選擇6，回車，將Advanced Routing功能disable掉。

 

Disable Advanced Routing...

============================

 

You have selected to disable advancedrouting.

Areyou sure? (y/n) [y] ? y   //輸入y

 

In order to accomplish the action, CheckPoint services should be restarted.

 Restart now ? (y/n) [y] ? y  //輸入y，下面顯示CP的服務重啟過程。

Advanced Routing Suite is now stopped

Stopping SmartView Monitor daemon ...

SmartView Monitor daemon is not running

Stopping SmartView Monitor kernel ...

Driver is Down.

rtmstop: SmartView Monitor kernel is notloaded

FloodGate-1 is already stopped.

×××-1/FW-1 stopped

SVN Foundation: cpd stopped

SVN Foundation: cpWatchDog stopped

SVN Foundation stopped

cpstart: Power-Up self tests passedsuccessfully

 

cpstart: Starting product - SVN Foundation

 

SVN Foundation: Starting cpWatchDog

SVN Foundation: Starting cpd

SVN Foundation started

 

cpstart: Starting product - ×××-1

 

FireWall-1: starting external ××× module --OK

FireWall-1: Starting fwd

 

 

Installing Security PolicyOffice-Cluster-Policy on all.all@NJZQ-CP-248

Fetching Security Policy from localhostsucceeded

 

Fetching Security Policy From:221.226.154.195 192.168.200.173

 

 Local Policy is Up-To-Date.

 ThePolicy was not installed because it is the same as the Policy already on theModule.

FireWall-1: enabling bridge forwarding

FireWall-1 started

 

cpstart: Starting product - FloodGate-1

 

FloodGate-1 is disabled. If you wish tostart the service, please run 'etmstart enable'.

 

cpstart: Starting product - SmartViewMonitor

 

SmartView Monitor: Not active

 

cpstart: Starting product - AdvancedRouting

 

Advanced Routing is not enabled. Please use'cpconfig' to enable it.

 

Advanced Routing was successfully disabled

 

Configuration Options:

----------------------

(1) Licenses and contracts

(2) SNMP Extension

(3) PKCS#11 Token

(4) Random Pool

(5) Secure Internal Communication

(6) Enable Advanced Routing

(7) Disable cluster membership for this gateway

(8) Configure Check Point CoreXL

(9) Automatic start of Check Point Products

 

(10) Exit

 

CP-248重啟后，查看cluster的狀態，立即恢復了正常。

 

[Expert@NJZQ-CP-248]# cphaprob stat

 

Cluster Mode:   New High Availability (Active Up)

 

 

Number    Unique Address  Assigned Load   State      

 

1         221.226.154.195 100%           Active     

2 (local) 19.19.19.248    0%              Standby    

 

[Expert@NJZQ-CP-248]#

查看CP-246，查看cluster狀態如下：

 

[Expert@NJZQ-CP-246]# cphaprob stat

 

Cluster Mode:   New High Availability (Active Up)

 

 

Number    Unique Address  Assigned Load   State      

 

1 (local) 19.19.19.246    100%            Active     

2         19.19.19.248    0%              Standby    

 

[Expert@NJZQ-CP-246]#

至此，兩臺CP防火墻的Cluster已經成功，主備倒換正常。

新聞名稱：Checkpoint防火墻ClusterXL故障之FIBProblem問題解決
文章路徑：http://aaarwkj.com/article46/jeideg.html

成都網站建設公司_創新互聯，為您提供網站建設、電子商務、網站排名、云服務器、外貿建站、動態網站

廣告

聲明：本網站發布的內容（圖片、視頻和文字）以用戶投稿、用戶轉載內容為主，如果涉及侵權請盡快告知，我們將會在第一時間刪除。文章觀點不代表本網站立場，如需處理請聯系客服。電話：028-86922220；郵箱：631063699@qq.com。內容未經允許不得轉載，或轉載時需注明來源： 創新互聯