這篇文章主要講解了“怎么在HP-UX11.31下安裝bash環境”，文中的講解內容簡單清晰，易于學習與理解，下面請大家跟著小編的思路慢慢深入，一起來研究和學習“怎么在HP-UX11.31下安裝bash環境”吧！

普寧ssl適用于網站、小程序/APP、API接口等需要進行數據傳輸應用場景，ssl證書未來市場廣闊！成為創新互聯建站的ssl證書銷售渠道，可以享受市場價格4-6折優惠！如果有意向歡迎電話聯系或者加微信：18982081108（備注：SSL證書合作）期待與您的合作！

bash默認:

（1）有命令歷史記憶功能,可以使用上下鍵切換命令；

（2）命令輸入為文件格式,進退簡單,符合人的習慣；

（3）可以使用TAB鍵補全命令或目錄；

（4）bash是以人為體驗為中心設計；

sh默認:

（1）默認沒有歷史記憶功能,但可以通過配置環境變量達到.

（2）命令輸入為vi模式,輸入命令時,就像我們使用vi編輯,i是插入,x是刪除,u撤銷等,

（3）沒有命令補齊功能.可以使用ECS鍵補齊目錄.

（4）在功能設計上卻有獨到之處.

習慣了bash環境，下面我們就在HP-UX上安裝bash環境做一個詳細的安裝，步驟如下所示：

1、檢查HP_UX的版本

root@rx2660 [/]uname -a

HP-UX rx2660 B.11.31 U ia64 1544395069 unlimited-user license

2、下載相應的軟件包

軟件包下載地址：

http://hpux.connect.org.uk/hppd/cgi-bin/search?package=on&description=on&term=bash

看到有一個簡介Run-time dependencies: gettext、libiconv、libunistring、readline、termcap是bash環境運行的依賴包，全部下載下來。

3、通過FTP上傳到HP-UX操作系統的/bash文件夾下

root@rx2660 [/bash]ll

total 111440

-rw-r-----   1 root       sys        10557440 Jan 11 02:29 bash-4.4.012-ia64_64-11.31.depot.gz

-rw-r-----   1 root       sys        26501120 Jan 11 02:29 gettext-0.19.8.1-ia64_64-11.31.depot.gz

-rw-r-----   1 root       sys        3450880 Jan 11 02:29 libiconv-1.15-ia64_64-11.31.depot.gz

-rw-r-----   1 root       sys        10414080 Jan 11 02:29 libunistring-0.9.7-ia64_64-11.31.depot.gz

-rw-r-----   1 root       sys         550089 Jan 11 02:59 make-4.2.1-ia64_64-11.31.depot.gz

-rw-r-----   1 root       sys        3481600 Jan 11 02:29 readline-7.0.003-ia64_64-11.31.depot.gz

-rw-r-----   1 root       sys        2078720 Jan 11 02:29 termcap-1.3.1-ia64_64-11.31.depot.gz

4、安裝

安裝下面的順序依次進行安裝，需要注意的是安裝的路徑必須是絕對路徑，不能使用相對路徑；如果是相對路徑，就會出現下面報錯信息：

root@rx2660 [/bash]swinstall -s make-4.2.1-ia64_64-11.31.depot.gz \*

=======  01/11/98 03:00:39 EAT  BEGIN swinstall SESSION

         (non-interactive) (jobid=rx2660-0011)

       * Session started for user "root@rx2660".

       * Beginning Selection

       * Target connection succeeded for "rx2660:/".

ERROR:   Could not contact host "make-4.2.1-ia64_64-11.31.depot.gz".

         Make sure the hostname is correct and an absolute pathname is

         specified (beginning with "/").

       * Source connection failed for

         "make-4.2.1-ia64_64-11.31.depot.gz:/var/spool/sw".

WARNING: More information may be found in the daemon logfile on this

         target (default location is

         make-4.2.1-ia64_64-11.31.depot.gz:/var/adm/sw/swagentd.log).

       * Selection had errors.

=======  01/11/98 03:00:39 EAT  END swinstall SESSION (non-interactive)

         (jobid=rx2660-0011)

正確的安裝方法：

root@rx2660 [/bash]swinstall -s /bash/gettext-0.19.8.1-ia64_64-11.31.depot.gz \*

=======  01/11/98 02:56:17 EAT  BEGIN swinstall SESSION

         (non-interactive) (jobid=rx2660-0009)

       * Session started for user "root@rx2660".

       * Beginning Selection

       * Target connection succeeded for "rx2660:/".

       * Source:

         /bash/gettext-0.19.8.1-ia64_64-11.31.depot.gz

       * Targets:                rx2660:/

       * Software selections:

             gettext.gettext-MAN,r=0.19.8.1,a=HP-UX_B.11.31_64

             gettext.gettext-RUN,r=0.19.8.1,a=HP-UX_B.11.31_64

       * Selection succeeded.

       * Beginning Analysis and Execution

       * Session selections have been saved in the file

         "/.sw/sessions/swinstall.last".

       * The analysis phase succeeded for "rx2660:/".

       * The execution phase succeeded for "rx2660:/".

       * Analysis and Execution succeeded.

NOTE:    More information may be found in the agent logfile using the

         command "swjob -a log rx2660-0009 @ rx2660:/".

=======  01/11/98 02:56:43 EAT  END swinstall SESSION (non-interactive)

         (jobid=rx2660-0009)

root@rx2660 [/bash]swinstall -s /bash/termcap-1.3.1-ia64_64-11.31.depot.gz \*

=======  01/11/98 03:04:02 EAT  BEGIN swinstall SESSION

         (non-interactive) (jobid=rx2660-0014)

       * Session started for user "root@rx2660".

       * Beginning Selection

       * Target connection succeeded for "rx2660:/".

       * Source:

         /bash/termcap-1.3.1-ia64_64-11.31.depot.gz

       * Targets:                rx2660:/

       * Software selections:

             termcap.termcap-RUN,r=1.3.1,a=HP-UX_B.11.31_64

       * Selection succeeded.

       * Beginning Analysis and Execution

       * Session selections have been saved in the file

         "/.sw/sessions/swinstall.last".

       * The analysis phase succeeded for "rx2660:/".

       * The execution phase succeeded for "rx2660:/".

       * Analysis and Execution succeeded.

NOTE:    More information may be found in the agent logfile using the

         command "swjob -a log rx2660-0014 @ rx2660:/".

=======  01/11/98 03:04:06 EAT  END swinstall SESSION (non-interactive)

         (jobid=rx2660-0014)

root@rx2660 [/bash]swinstall -s /bash/libiconv-1.15-ia64_64-11.31.depot.gz \*

=======  01/11/98 03:04:36 EAT  BEGIN swinstall SESSION

         (non-interactive) (jobid=rx2660-0015)

       * Session started for user "root@rx2660".

       * Beginning Selection

       * Target connection succeeded for "rx2660:/".

       * Source:

         /bash/libiconv-1.15-ia64_64-11.31.depot.gz

       * Targets:                rx2660:/

       * Software selections:

             libiconv.libiconv-MAN,r=1.15,a=HP-UX_B.11.31_64

             libiconv.libiconv-RUN,r=1.15,a=HP-UX_B.11.31_64

       * Selection succeeded.

       * Beginning Analysis and Execution

       * Session selections have been saved in the file

         "/.sw/sessions/swinstall.last".

       * The analysis phase succeeded for "rx2660:/".

       * The execution phase succeeded for "rx2660:/".

       * Analysis and Execution succeeded.

NOTE:    More information may be found in the agent logfile using the

         command "swjob -a log rx2660-0015 @ rx2660:/".

=======  01/11/98 03:04:39 EAT  END swinstall SESSION (non-interactive)

         (jobid=rx2660-0015)

root@rx2660 [/bash]swinstall -s /bash/libunistring-0.9.7-ia64_64-11.31.depot.gz \*

=======  01/11/98 03:05:22 EAT  BEGIN swinstall SESSION

         (non-interactive) (jobid=rx2660-0016)

       * Session started for user "root@rx2660".

       * Beginning Selection

       * Target connection succeeded for "rx2660:/".

       * Source:

         /bash/libunistring-0.9.7-ia64_64-11.31.depot.gz

       * Targets:                rx2660:/

       * Software selections:

             libunistring.libunistring-INC,r=0.9.7,a=HP-UX_B.11.31_64

             libunistring.libunistring-RUN,r=0.9.7,a=HP-UX_B.11.31_64

       * Selection succeeded.

       * Beginning Analysis and Execution

       * Session selections have been saved in the file

         "/.sw/sessions/swinstall.last".

       * The analysis phase succeeded for "rx2660:/".

       * The execution phase succeeded for "rx2660:/".

       * Analysis and Execution succeeded.

NOTE:    More information may be found in the agent logfile using the

         command "swjob -a log rx2660-0016 @ rx2660:/".

=======  01/11/98 03:05:27 EAT  END swinstall SESSION (non-interactive)

         (jobid=rx2660-0016)

root@rx2660 [/bash]swinstall -s /bash/bash-4.4.012-ia64_64-11.31.depot.gz \*

=======  01/11/98 03:06:23 EAT  BEGIN swinstall SESSION

         (non-interactive) (jobid=rx2660-0017)

       * Session started for user "root@rx2660".

       * Beginning Selection

       * Target connection succeeded for "rx2660:/".

       * Source:

         /bash/bash-4.4.012-ia64_64-11.31.depot.gz

       * Targets:                rx2660:/

       * Software selections:

             bash.bash-RUN,r=4.4.012,a=HP-UX_B.11.31_64

       * Selection succeeded.

       * Beginning Analysis and Execution

       * Session selections have been saved in the file

         "/.sw/sessions/swinstall.last".

       * The analysis phase succeeded for "rx2660:/".

       * The execution phase succeeded for "rx2660:/".

       * Analysis and Execution succeeded.

NOTE:    More information may be found in the agent logfile using the

         command "swjob -a log rx2660-0017 @ rx2660:/".

=======  01/11/98 03:06:25 EAT  END swinstall SESSION (non-interactive)

         (jobid=rx2660-0017)

附帶swinstall安裝界面步驟：http://www.thegeekstuff.com/2010/06/install-remove-depot-packages/

5、查看軟件包的安裝情況

root@rx2660 [/bash]swlist

# Initializing...

# Contacting target "rx2660"...

#

# Target:  rx2660:/

#

……(此處省略N行記錄)

#

# Product(s) not contained in a Bundle:

#

  OnlineJFS                             B.11.31        Online features of the VxFS File System

  bash                                  4.4.012        bash          

  gettext                               0.19.8.1       gettext       

  libiconv                              1.15           libiconv      

  libunistring                          0.9.7          libunistring  

  termcap                               1.3.1          termcap     

6、修改環境變量

root@rx2660 [/]chmod 744 .profile

root@rx2660 [/]vi .profile

".profile" 50 lines, 975 characters

# @(#)B.11.31_LR

# Default (example of) super-user's .profile file

# Do not put "." in PATH; it is a potential security breach.

# Do not put "/usr/local/bin" in PATH; it is a potential security breach.

# Example assumes /home/root exists.

        set +u

        PATH=/usr/sbin:$PATH:/sbin:/home/root

# Be sure that VUE does not invoke tty commands

   if [ ! "$VUE" ]; then

   # Set up the terminal:

        if [ "$TERM" = "" ]

        then

                eval ` tset -s -Q -m ':?hp' `

        else

                eval ` tset -s -Q `

        fi

        stty erase "^H" kill "^U" intr "^C" eof "^D"

        stty hupcl ixon ixoff

        tabs

        echo

        echo "Value of TERM has been set to \"$TERM\". "

        export TERM

".profile" 50 lines, 975 characters

# Set up shell environment:

        set -u                                  # error if undefined variable.

        trap "echo 'logout root'" 0             # what to do on exit.

# Set up shell variables:

        MAIL=/var/mail/root

        # don't export, so only login shell checks.

        echo "WARNING:  YOU ARE SUPERUSER !!\n"

umask 027

#增加下面一句

export PATH=$PATH:/usr/local/bin

7、退出會話，重新登錄檢查bash是否可用

root@rx2660 [/]bash

/usr/lib/hpux64/dld.so: Unable to find library 'libhistory.so'.

Killed

運行bash，出現上面的報錯信息：是由于缺少依賴的包

解決方法：

root@rx2660 [/bash]swinstall -s /bash/readline-7.0.003-ia64_64-11.31.depot.gz \*

=======  01/11/98 03:21:11 EAT  BEGIN swinstall SESSION

         (non-interactive) (jobid=rx2660-0019)

       * Session started for user "root@rx2660".

       * Beginning Selection

       * Target connection succeeded for "rx2660:/".

       * Source:

         /bash/readline-7.0.003-ia64_64-11.31.depot.gz

       * Targets:                rx2660:/

       * Software selections:

             readline.readline-INC,r=7.0.003,a=HP-UX_B.11.31_64

             readline.readline-RUN,r=7.0.003,a=HP-UX_B.11.31_64

       * Selection succeeded.

       * Beginning Analysis and Execution

       * Session selections have been saved in the file

         "/.sw/sessions/swinstall.last".

       * The analysis phase succeeded for "rx2660:/".

       * The execution phase succeeded for "rx2660:/".

       * Analysis and Execution succeeded.

NOTE:    More information may be found in the agent logfile using the

         command "swjob -a log rx2660-0019 @ rx2660:/".

=======  01/11/98 03:21:15 EAT  END swinstall SESSION (non-interactive)

         (jobid=rx2660-0019)

再次運行bash成功，這樣就可以使用tab鍵補全指令信息

root@rx2660 [/]bash

bash-4.4#

bash-4.4#

感謝各位的閱讀，以上就是“怎么在HP-UX11.31下安裝bash環境”的內容了，經過本文的學習后，相信大家對怎么在HP-UX11.31下安裝bash環境這一問題有了更深刻的體會，具體使用情況還需要大家實踐驗證。這里是創新互聯，小編將為大家推送更多相關知識點的文章，歡迎關注！

本文標題：怎么在HP-UX11.31下安裝bash環境-創新互聯
URL地址：http://aaarwkj.com/article42/ccpcec.html

成都網站建設公司_創新互聯，為您提供響應式網站、企業建站、營銷型網站建設、關鍵詞優化、品牌網站制作、服務器托管

廣告

聲明：本網站發布的內容（圖片、視頻和文字）以用戶投稿、用戶轉載內容為主，如果涉及侵權請盡快告知，我們將會在第一時間刪除。文章觀點不代表本網站立場，如需處理請聯系客服。電話：028-86922220；郵箱：631063699@qq.com。內容未經允許不得轉載，或轉載時需注明來源： 創新互聯